Guide · Handover
Flat handover checklist
On handover day you get the keys and, usually, a defect list. This guide groups the usual checks by room so you can go through the flat in order, record problems clearly and pass them to the developer.

Information checked: 27 October 2026
Before you go
- Bring the handover notice and any documents the developer asks for. If someone is collecting the keys for you, ask what authorisation they need.
- Bring the sales brochure. The Consumer Council advises checking the layout, and the brand, model and number of included appliances, against the brochure.
- Look at the floor plan first and plan your route, so nothing is missed or checked twice.
- If you want a professional to inspect, consider a registered building surveyor, architect or engineer. The Consumer Council notes that Hong Kong has no licence for "flat inspectors", so check their background first.
Suggested inspection route
- Entrance
- Living / dining
- Bedrooms
- Bathroom
- Kitchen
- Windows / balcony
Tools
| Tool | Use |
|---|---|
| Phone camera | Record the flat's condition and every defect |
| Torch | Look inside cabinets, false ceilings and pipe ducts |
| Small mirror | See outside window edges and under sinks |
| Tape measure | Check dimensions |
| Spirit level, marble or table-tennis ball | Check floors and window sills are level |
| A card | Slide into a closed window gap to check it seals |
| Small mallet | Tap walls and tiles to hear hollow spots |
| Sticky notes | Mark defects |
| Tissue | Wipe pipe joints to check for seepage |
| Light bulb and phone charger | Test light points and sockets |
Checks
Walls and ceilings
- Plaster is straight and level, with no waves, bulges, cracks, water stains or mould.
- Paint has no blisters, peeling, yellowing or colour differences.
- False ceilings have no cracks, warping or water stains; open the access hatch to look for signs of leaks.
Floors and skirting
- Timber floors have no bulges, warping, uneven joints or large gaps.
- Tiles and stone have no cracks, chips or hollow spots; tap to listen.
- No obvious gaps or loose skirting along walls and floors.
- No unusual dark or white water marks on the floor.
Windows and balcony doors
- No water stains or marks around windows and sills.
- Frames and glass are free of scratches and warping; sealant is complete and not perished.
- Sashes and sliding doors open smoothly and quietly, and close tightly.
- Hinges, catches and grille screws are present, tight and rust-free.
Doors
- Door leaves and frames are not warped and joints are tight.
- Locks and handles work and nothing is loose.
- Hinges have all their screws, no rust and no noise.
- Door closers do not slam or fail.
- Peepholes, chains and door stops are present and secure.
Kitchen
- Cabinet doors and shelves line up; surfaces have no bubbles or scratches.
- Wall cabinets are firmly fixed; hinges and handles are tight.
- Worktops have no cracks or stains; the sealant between sink and worktop is complete.
- Test the hob, range hood, exhaust fan, fridge and water heater one by one.
Bathroom
- Bath, shower tray, toilet, basin and taps match the brand and model in the sales brochure.
- Fittings are secure, with no chipped ceramic or discoloured chrome.
- Mirrors and mirror cabinets are secure, with no cracks or chips.
- Shower screen hinges or tracks are secure; glass is not scratched.
- Fill the basin and sink to test the overflow and sealants.
- The toilet cistern does not keep running or dripping.
Water and drainage
- Run every tap; water flows normally with no yellowing, sediment or smell.
- Taps do not drip when closed; joints do not seep (wipe with tissue).
- Pour a little water on the floor and check it runs to the floor drain.
- Drains have no bad smell or backflow.
Electrical
- Count the main switchboard, sockets, switches, and TV, phone and data points, and check their positions.
- Cover plates are not damaged, loose or crooked.
- Test every light point and socket with a bulb and a charger.
- Test the earth leakage circuit breaker (the test button in the switchboard) and check circuit labels are correct.
- TV, phone and internet points can only be tested after you move in and connect services.
Gas
- Count the gas hob and water heater and check their positions.
- Gas hoses are not loose or damaged; check the expiry date printed on the hose.
- Test the main gas valve, water heater and hob. For opening a gas account, see the moving timeline guide.
Included appliances and others
- Against the sales brochure, count and test the air conditioners, washing machine, microwave, door phone and other appliances.
- Built-in appliances may be hard to remove for repair later. The Consumer Council suggests asking who handles repairs after the warranty period ends.
When you find a problem
- Put a sticky note on it and take one close-up and one wide photo so the location is clear.
- Write the location and problem clearly and briefly on the defect list, for example "missing sealant, left side of master bedroom window sill".
- Submit it in writing before the deadline. Deadlines and arrangements follow your sale and purchase agreement. Government information says new buildings usually have a six-month defects liability period, and the Consumer Council notes that agreements usually let buyers give written notice of defects within 6 months of completion.
- Keep all written correspondence. The Consumer Council notes that repairs can take time or need repeating; if you think the developer is not following up reasonably, you can contact the Council.
- Check again after repairs are done.
This guide gives general information only and is not legal or professional advice. The defects period, deadlines and responsibilities follow your sale and purchase agreement. If in doubt, ask a solicitor or a qualified professional.
How Settle³ helps
After handover, you can set up your home in Settle³ room by room, list what you need to buy, and keep receipts and warranties in one place.
Create a free account →Sources
Information checked: 27 October 2026